FUCOPRO 4 Port Long Range Flex Expansion Board System E1.31 Controller

Adding product to your cart

Product Features General Information Available with either the AlphaPix Evolution or HinksPix Pro CPUs Click here for a complete comparison of the individual features of each CPU type The system is based on the Flex Expansion Board System which can drive up to three expansion boards Using the options above, you can customize your installation as to power and specific expansion boards for your specific project. Each controller is built to order. All power wiring including input and output wire is completely assembled The lowest cost multi-expansion board based system on the market today Supports all major lighting applications Light-o-Rama Advanced (S3/S4/S5) xLights (all) Resolume Madrix Any applications that supports Artnet / sCAN / e1.31 protocols Expansion Board Information SPI Expansion Board Maximum of 5,440 Pixels or 32 Universes / 16,384 DMX Channels Blown fuse indicators (Red LED light will go out when fuse is blown) Each SPI board has a dedicated temperature and voltage sensor visible from the screen or web interface on the CPU Power Input 60 Amps Normal / (30 Amps per bank / two individual bank inputs) Wattage per bank (with one power supply as supplied) 12 Volts: 360 Watts 5 Volts: 300 Watts Power Output 5 Amps Maximum (mini fused blade) per output Wattage per output 5 Volts: 25 Watts 12 Volts: 60 Watts Long Range Differential Expansion Board (Expansion Board) Maximum of 5,440 Pixels or 32 Universes / 16,384 DMX Channels (Up to Four Long Range Differential Receiver Boards per Expansion Board) Per Port / CAT5 Cable- Up to 1,360 pixels Supports only pixels that have three wires (data / positive / negative) - this includes support for all HolidayCoro 2811/1903 pixels (no clock wire is present) 300 Feet / 91 meters or greater from expansion board output to receiver input using stand CAT5 network cable Note: Receiver boards must only be used with data input from the Long Range Differential Expansion Board - they cannot be used with DMX 1.11/1990 or E1.31 directly Long Range Differential Receiver Board (up to 4 per Long Range Expansion Board) For use with the Long Range Differential Expansion Board Not sold on this page, see: Bare board and Assembled Ready2Run Receiver System Per SPI Output - Up to 340 pixels / 2 DMX universes (exclusive of power, see chart below) Each output features euro style plugs for easy assembly and removal Blown fuse indicators (Red LED light will go out when fuse is blown) CAT5 Data Input (requires Long Range Differential Expansion Board for operation, will not work with E1.31 or E1.11 signals) Power indicator light Power Output 5 Amps Maximum (mini fused blade) per output Wattage per output 5 Volts: 25 Watts 12 Volts: 60 Watts Up to 10 AWG wire (we recommend a minimum of 18 AWG for power inputs - see our website) Polarity reversal input protection Voltage Range: 5 to 24v DC Power Input 20 Amps Voltage Range: 5 to 24v DC Heavy duty screw down connections that support spade terminals Positive and negative clearly marked on board Warranty 1 Year Warranty on CPU and Expansion Boards Excludes: CPU Board damage as a result of connection to an LOR network Board damage due to improper mounting to a non-conductive surface Environmental damage (water, snow, etc) Physical damage Support The majority of our setup and troubleshooting information and videos can be found on our setup pages AlphaPix Evolution HinksPix Pro Support options: Normal Support - Email / Phone where required, no additional cost Priority Support - Dedicate phone number / Remote Control to PC / Email where required, additional cost HolidayCoro offers support in the following areas with this controller: General wiring and troubleshooting Testing of pixels (some non-HolidayCoro pixels may have limited support) General setup of the networking needed to support the connection of the controller a Windows PC Basic configuration of sequencing applications Basic configuration of output to the RS485 output ports Complex networking environments HolidayCoro does not support the following: Sending data over wireless networks Configuration of some applications (due to the huge number of applications, we may refer you to your application vendor for instructions on setting up their application) Configuration or troubleshooting of individual sequences - please contact your vendor for application specific questions Physical Operating Temperatures - Negative 4f (-20c) to 158f (+70) County of Origin / Assembly China (from globally sourced components) Country of Design AlphaPix: USA / China HinksPix: USA Flex Expansion: USA / China 16 Output Flex SPI Limits with Common HolidayCoro Pixels Without Power Injection 100% Duty Cycle @ 100% Full White Output / May require one power supply per bank 60 Amp input With Power Injection @ 100% Full White Output / Requires external power supplies) NOTE: HolidayCoro does not provide or endorse power injection. Customers should be fully aware of power injection wiring requirements. Maximum  Per SPI Output Maximum  Per SPI Expansion Board Maximum Per SPI Output Maximum Per SPI Expansion Board 30LED/10IC Pixel Strip - 5 Meters (with pre-attached waterproof connections) 1 16 6 108 30LED/30IC Pixel Strip - 5 Meters 1 16 2 36 48LED/16IC Pixel Strip - 5 Meters 0 0 4 69 60LED/20IC Pixel Strip - 5 Meters 0 0 3 55 60LED/60IC Pixel Strip - 5 Meters 0 0 1 18 8mm/12mm Pixel Node ( bullet or flat/square) - 5v 83 Nodes  1,328 Nodes  340 Nodes 5,440 Nodes 8mm/12mm Pixel Node ( bullet or flat/square) - 12v 111 Nodes  1,776 Nodes  340 Nodes 5,440 Nodes Rectangle or Square Pixel Modules - 12v 78 Modules  1,248 Modules 340 Modules 5,440 Modules Brilliant Bulb (single bulb) 125  Bulbs 2,000  Bulbs 340 Bulbs 5,440 Bulbs 4 Output SPI Output Limits for Flex Long Range Receiver with Common HolidayCoro Pixels Without Power Injection 100% Duty Cycle @ 100% Full White Output 20 Amp input With Power Injection @ 100% Full White Output / Requires external power supplies  NOTE: HolidayCoro does not provide or endorse power injection. Customers should be fully aware of power injection wiring requirements. Maximum  Per SPI Output Maximum  Per Receiver Board Maximum Per SPI Output Maximum Per SPI Expansion Board 30LED/10IC Pixel Strip - 5 Meters (with pre-attached waterproof connections) 1 4 6 24 30LED/30IC Pixel Strip - 5 Meters 1 4 2 8 48LED/16IC Pixel Strip - 5 Meters 0 0 4 17 60LED/20IC Pixel Strip - 5 Meters 0 0 3 4 60LED/60IC Pixel Strip - 5 Meters 0 0 1 4 8mm/12mm Pixel Node ( bullet or flat/square) - 5v 83 Nodes  332 Nodes  340 Nodes 1,360 Nodes 8mm/12mm Pixel Node ( bullet or flat/square) - 12v 111 Nodes  444 Nodes  340 Nodes 1,360 Nodes Rectangle or Square Pixel Modules - 12v 78 Modules  312 Modules 340 Modules 1,360 Modules Brilliant Bulb (single bulb) 125 Bulbs 500 Bulbs 340 Bulbs 1,360 Bulbs NOTES: The above maximum recommendations can vary based on a variety of factors including - voltage, wire gauge, distance between pixels, temperature, color of light output, controller duty cycle, customer expectations of color rendering and other factors.

• Share Share on Facebook
• Tweet Tweet on Twitter
• Pin it Pin on Pinterest