Overview
Designed to produce rich color and premium white light in a wide variety of applications where light quality is critical, the MAC Encore™ Wash CLD is an LED-based alternative to the MAC Viper Wash DX. The feature-packed soft edge moving head offers unparalleled 6000 K crisp, neutral daylight, and doubles as a modern replacement for generic fixtures like HMI based Fresnel fixtures, with the additional benefit of color mixing and movement.
Unparalleled 6000 K cold white light quality
Super silent cooling and effects operation
Best-in-class size/weight/performance ratio
Features
Pure white LED engine with 6000 K CCT.
No color temperature variation during zoom and dimming.
Flicker-free operation—LED driver frequency suitable for all camera applications.
Whisper-silent—Combines convection and forced air cooling with user-selectable output vs. sound level control.
Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
Vibrant CMY color mixing with a superior palette of colors ranging from rich, saturated primary colors to light and smooth pastel shades.
Variable CTO—daylight to tungsten CCT control and expansion of the CMY palette that stays true to the black body curve.
Color wheel—6 interchangeable dichroic filters + open.
Fresnel lens: 1:4 zoom—precise, silent and fast zoom.
PC lens (optional): 1:5 zoom—precise, silent and fast zoom.
Internal barndoor system with two shutter blades and iris. Shutter blades can overlap for full blackout and the entire system rotates +/- 100°. Repeats cues with great precision.
Precise and tight iris with adjustable dynamic effects.
Animotion™ FX System—Internal dimming effect macros for stunning 3D mid-air and projection effects.
Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
Compact size—L: 452 x W: 480 x H: 745 mm / L: 17.8 x W: 18.9 x H: 29.3 in.
Low weight—28.5 kg/62.9 lbs
Foam rubber (SIP) flight case insert for secure shipment.
Specifications
Physical
Length:
452 mm (17.8 in.)
Width:
480 mm (18.9 in.) across yoke
Height:
755 mm (29.8 in.) maximum
745 mm (29.4 in.) head straight up
Weight:
28.5 kg (62.9 lb.)
Minimum center-to-center distance in side-by-side installation: 730 mm (28.8 in.)
Dynamic Effects
Pre-programmed effects: Two ranges of FX, independent or synchronized/combined
Color mixing: CMY, independently variable 0 - 100%
Color temperature control: Variable 6000 - 2700 K
Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color
Barn doors: Internal, two blades with individually controllable insertion, +/- 100° module rotation
Iris: Variable 0 - 100%
Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
Dimming options: Choice of four dimming curves
Zoom: Motorized
Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
Pan: 540°
Tilt: 268°
Position correction system: Absolute position monitoring
Control and Programming
16-bit control: Dimming, pan and tilt
Movement control options: Tracking and vector
Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
DMX channels: 24
Fixture Identification: User-settable ID number
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485
Fixture software update: USB memory device or over DMX link
Optics
Light source: 6000 K white LEDs
CRI (Color Rendering Index): >80
Total LED engine power: 468 W
Minimum LED lifetime: 50,000 hours (to >80% luminous output)*
Zoom range with Fresnel lens (standard): 14° - 60° one-tenth peak (1:4)
Zoom range with PC lens (optional): 11° - 58° one-tenth peak (1:5)
*Figure obtained under manufacturer's test conditions
Photometric Data
Light engine luminous output: ≥ 39,400 lumens
Fixture luminous output with Fresnel lens (standard): 11,000 lumens
Fixture luminous output with PC lens (optional): 12,000 lumens
CQS (Color Quality Scale): >80
TM-30 Rf (IES TM-30-15 Fidelity Index): >80
TM-30 Rg (IES TM-30-15 Gamut Index): >96
TLCI (Television Lighting Consistency Index): >70
Construction
Housing: High-impact flame-retardant thermoplastic
Color: Black
Protection rating: IP20
Installation
Mounting points: 4 pairs of 1/4-turn locks
Location: Dry location only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 0.2 m (8 in.)
Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)
Connections
AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
DMX and RDM data in/out: 5-pin locking XLR
Electrical
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Power Consumption: 64 W
Half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
Typical Power and Current
120 V, 60 Hz: 5.0 A, 596 W, PF 0.998
208 V, 60 Hz: 2.9 A, 581 W, PF 0.988
230 V, 50 Hz: 2.6 A, 580 W, PF 0.981
240 V, 50 Hz: 2.2 A, 585 W, PF 0.979
Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor
Thermal
Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)
Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
Approvals
EU safety: EN 60598-2-17, EN 62471, EN62493
EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-11, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety: CSA C22.2 No. E598-2-17
Canadian EMC: ICES-003 Class A
Australia/NZ: RCM
Included Items
Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
Accessories
Gelframe MAC Encore: P/N 91001000
Set of Followspot Handles MAC Encore: P/N 91001001HU
PC Lens Assy MAC Encore Wash: P/N 91616110HU
SIP Packaging MAC Encore Family: P/N 91616115HU
PC (planoconvex) Lens for MAC Encore Wash: P/N TBA
Cables and connectors:
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler Clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
Flightcase: Two-unit Flightcase for MAC Encore™*: P/N 91515048
*Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts
Related Items
Martin® M-PC 2U incl. Martin® M-DMX USB-DMX Interface: P/N 90737070
Martin® M-PC Pro-64 / LJ-4 Controller Kit incl. Martin® M-DMX USB-DMX Interface: P/N 90737060
Martin™ RDM 5.5 Splitter: P/N 90758150
Ordering Information
MAC Encore™ Wash CLD EPS (in cardboard box, polystyrene packaging): P/N 90234040
MAC Encore™ Wash CLD SIP (in cardboard box with SIP foam flightcase insert): P/N 90234045
MAC Encore™ Wash CLD, white finish, EPS (in cardboard box, polystyrene packaging): P/N 90234050HU