ProX T-LS35C Stage Complete Portable Mobile DJ Multi-Size 5ft/10ft/15ft Wide Triangular Lighting Truss System 10ft Height Crank Stand
Description
The ProX T-LS35C is a triangle crank truss system. This medium-duty truss lighting stand package includes two high-quality crank up stands & three 5FT triangle truss sections that create a near 5ft, 10ft or 15ft span. The stand can safely reach 9-10Ft. A pair of T-Adapters are included so you may easily mount your truss to the stands. You can mount up to 360 lbs evenly. Truss tubes are 35mm - 1 3/8" in diameter. Truss sections are 6 inches in overall width and 57" long.
Sold Separately: When purchasing a T-LS35C truss crank system. You will probably want the carry bags to haul your system around. These are high-quality bags, stitched with high-quality materials and will help you safely and securely transport your truss system around with ease. The carry bag T-LS35C-BAG is optional and is sold separately.
Features
Features crank up system allowing 5FT, 10FT, or 15FT wide configurations
Complete Portable Multi-Size Lighting Truss System
Incl two high-quality 10ft crank-up stands and Truss T-Bars
Set of (3x) 57" Triangle Bolted Truss. This medium-duty triangle truss sections create a nearly 15ft span.
Adjustable span from 5' to 10' and 15 feet wide!
Truss pipes are 1.5" in diameter. Truss sections are 6 inches in overall width.
You can create a 57" / 5FT span all the way up to a 171" ~ 15Ft span depending on your specific needs.
Holds up to 360 lbs evenly distributed.
Shipping Dimensions (sent in 2 separate boxes):
BOX#1: 3 Truss Pieces: 57.5" x 24" x 11" - 43lbs
BOX#2: 2 Crank stands: 59"x 16" x 10" - 55lbs
Product Actual Weight: 92LBS
Exercise caution when loading this or any ProX truss system. Be sure to evenly distribute your fixtures or equipment for safety.
Always use a safety cable or chain on all mounted fixtures.
SAFETY INSTRUCTIONS
To avoid problems a competent person should inspect all rigging hardware, stands and equipment before each use and periodically do a major inspection for signs of wear, abuse, and general adequacy, as well as perform any manufacturer recommended preventive maintenance on schedule. Observe all warnings and usage instructions in the full manual.
Basic Usage:
Ensure that the stand is positioned on hard stable surface, in suitable location, on firm ground and clear of overhead obstacles.
Stabilize legs before lifting the tower or any load.
When outdoors, secure the tower with braces or cables, in case of wind.
Check the cable, it should not show damaged or flattened areas nor broken strands.
Using the Winch:
For Lifting the tower, turn the winch handle clockwise.
For lowering the tower, turn the winch handle counter-clockwise.
Safety Notes:
Loading on truss and stands should comply with rated weights.
Lock all the safety mechanisms (safety pins, knobs)
Loads must be centered & balanced on each lifting unit.
Safety chains must be installed on each item attached to unit.
Leave a safety perimeter with a radius 5ft greater than the maximum height of the stands during lifting and lowering of loads.
During transport, close all the sections and lock the lifting carriage.
Do not attempt to move the stand when loaded or in extended position.
Service Notes:
Servicing and repairs must be made by qualified persons.
Cable, pulleys and telescopic masts must be inspected before each use. Any damaged cable must be replaced immediately.
Annual inspection by an authorized technician is suggested.
Suggested Shipping Method: Parcel
UPC
741459148232
Item Contents
T-LS35C Stands (1)
T-LS35C Truss (1)